Article to be coated must be free from dust and grease and throughly be cleaned, Iron or zinc phosphating strongly recommended for better corrosion resistance.
Powders are applied by corona charging equipments. Voltage may vary between 30-10 KV depending on product.
Film thickness should be maintained as per manufacturer recommendation. Structural finishes should be applied at 80-100 mic and plain solid shades at 50-60 mic.
Follow curing cycle as recommended by the manufacturer.
Powders should be stored in dry and cool area below 25°C. Validity of the powder is six months from the date of manufacturing.
Do not mix our products with that of other manufacturers.